Product Category: Full Body
Many hours of R&D have been invested to perfect a harness that offers world leading safety features with an incredibly comfortable, light weight and easy fit.
The Ultralite X Harness weighs just 1.35 kg and is so comfortable and easy to wear you’ll forget you’ve got it on.
The harness features a cross-style design of webbing attached to pliable, supportive mesh padding that provides an even load distribution to the torso in the event of a fall. The innovative design consists of a new lightweight, 3D, breathable, reflective mesh and an all alloy componentry with splash, water proof and reflective webbing.
The reflective properties provide pronounced visibility and safety when working in darkness. Non-metallic front and rear free fall arrest attachment points have contributed to the overall impressive weight of 1.35 kg – a significant weight saving compared to standard full body harnesses.
The Ferno Ultralite X Harness is certified to AS/NZS 1891.1:2007.

Step 1

Remove harness from packaging. Hold harness in front of you by rear dorsal free fall arrest D-ring as shown. Gently shake harness to ensure all straps are not twisted or tangled.

Step 2

Put harness over each shoulder similar to putting on a coat. The rear dorsal free fall arrest D-ring should now be between your shoulder blades.

Step 3

Fasten chest strap and waist strap  (if fitted) with buckle, ensuring each buckle plate lays flat on each other.

Step 4

Bend your knees and position yourself as shown. Reach between your legs and connect right strap to right leg buckle ensuring the buckle plates fasten through each other. Repeat this procedure for your left leg. It is important the straps between your legs are not twisted or crossed.

Step 5

When finished steps 1 to 4 ensure your harness is secured correctly including the black strap which is positioned under the buttocks  (as shown above).The finished fitting should feel snug but not restrict your movement in  any way.

Strap Adjustment

Tighten a strap

Feed the webbing through the buckle and secure by moving the keeper.

Loosen a strap

Move the keeper up the strap, and reposition the buckle for more room.

Shoulder straps

Tilt the keeper and whilst holding onto the top piece of webbing underneath the keeper, move the keeper up the webbing.

Waist straps

For harnesses with waist straps, pass the excess webbing through the keeper to secure.

Leg straps

The slide keepers on the leg straps should be positioned to the front. Make sure the leg straps are not twisted.

Lanyards are designed to be the flexible link between a harness and attachment point providing you with the maximum safety possible. Ferno absorber lanyards are designed to limit the force or shock load sustained in the event of a fall to under 6 kN.

Ferno offer a full range of Australian Standards approved energy absorbing lanyards that provide a solution to any height safety scenarios.

Hardware Options:

VCT A428TOZO Steel screw gate karabiner
VCT A430TVZO Steel small triplock karabiner
VCT 595TBZO Steel large triplock karabiner
VCT L4280001 Alloy screw gate karabiner
VCT 4300001 Alloy triplock karabiner
VPEN 9652 Steel double action hook
VISC SH903 3-Way snap hook
VUSA S-2230 Steel scaffold hook G/O 63 mm
VCT L3536201 Alloy scaff hook G/O 60 mm
VCT L3702101 Alloy scaff hook G/O 110 mm

The Lanyard Mate is an AS/NZS 1891.1:2007 approved energy absorbing lanyard that is self adjustable from 70 cm to 2 m providing flexible and safe access to the users workplace.

It can be supplied with an array of steel or alloy hardware depending on the individuals needs.

Ferno’s Hottie Lanyard is made entirely from industry leading, flame retardant, fire and cut proof Proban® and Nomex® by Dupont® providing additional safety for welders or hot work applications.

Approved to AS/NZS 1891.1:2007.

A single plastic coated, galvanised wire rope with an energy absorber. The wire rope is a suitable alternative to webbing when welding or working with cutting tools.

Available with screw gate karabiner or double action hook at the energy absorber end.

Australian Standards approved to AS/NZS 1891.1:2007.

Designed by industry professionals and tested in the field to meet the day to day requirements of roof workers. All components have been carefully selected for durability and quality ensuring longevity of service while keeping budgets in check.

The Tower Workers Kit contains everything necessary for working on top of towers, electrical poles and pylons.

A simple to install temporary fibre rope lifeline system that can span between fixed anchorage points and provide a safe horizontal anchorage for up to four users in restraint, or two users in a fall arrest application. ‘EN795 Class C’