Marine Firemanâs Outfit comprising Helmet, Jacket,Trousers, Firemanâs Gloves, Non-conductive Glovesand Firemanâs Boots

Helmet (EN443)

The Fuego helmet is constructed with a glass fibrecharged polyamide shell providing a very high levelof protection against the risks encountered in shipbornefire fighting. The helmet is heat, flame, shockand electrical hazard resistant. An aluminised neckcurtain and lift up visor to EN166 is provided asstandard. Weight 1.8 kgs

Flameguard Plus Suit (EN469)

The Flameguard Plus Suit is a two-piece garmentwith a two-layer construction. The outer shell usesa fire resistant substrate as a base laminated to analuminised film optimised for the marine salt waterenvironment. The jacket has a stand up collar,overlapping front with touch and close fastening tothe front and collar. The trousers have wideelasticated braces with adjusters and quick-releasebuckles. Weight 4.5 kgs

Firemanâs Gloves Leather (EN659)

Leather gloves with Kevlar insert and cuff. Heatresistant, slash and puncture resistant.Weight 0.5kgs

Non-Conductive Gloves (EN60903)

Electrically insulating to 500 volts working, tested to2500 volts AC.Weight 0.1 kgs

Firemanâs Boots (EN 20345, EN 15090)

Fire resistant Wellingtons, made in fireproof nitrilerubber with polymer toe cap and composite antiperforationmid-sole. Weight 2.5 kgs

• Excellent resistance to heat contact, heat flow, fire.
• Excellent resistance to chemicals : fuels, oils,greases, solvents, weak and diluted acids.
• Excellent resistance to abrasion and cuts

Ships Wheel and SOLAS approved Firemanâs Outfit comprising Helmet, Jacket, Trousers, Firemanâs Gloves, Non-conductive Gloves and Firemanâs Boots.

Helmet(EN443)

The Compacta helmet is constructed in flame retardant high temperature copolymer plastic and has the following features.

• Long term resistance to 140°C/30 min, 250°C/15 min
• Polycarbonate anti-scratch and anti-fog coated visor
• Removable aluminised neck protector
• Interior polyurethane foam shock absorber
• Integrated adjustment system 52-63 cm
• Luminescent and reflective tape
• Flame retardant cotton chinstrap
• Compatible with full face BA mask

Fire Buddy Suit (EN469)

The FireBuddy Suit is a two-piece garment with a four-layer construction. The outer shell is aramid. The second layer is a waterproof breathable membrane. The third layer is an meta-aramid/para-aramid felted thermal barrier and the fourth layer is a modacrylic/Lenzing lining.The jacket has a stand up collar, elasticated cuffs, and is closed by a zip covered by an overlapping front with touch and close fastening to the front and collar. The trousers have wide elasticated braces with adjusters and quick-release buckles. Optional fire resistant retro reflective tape can be fitted to the wrists, hem and ankles. Optional radio and thigh pockets can be fitted as well.

Firemanâs Gloves Leather (EN659)

Leather gloves with Kevlar insert and cuff.Heat resistant, slash and puncture resistant.

Non-Conductive Gloves (EN60903)

Electrically insulating to 500 volts working, tested to 2500 volts AC.

Firemanâs Boots (EN 20345, EN 15090)

Fire resistant Wellingtons, made in fireproof nitrile rubber with polymer toe cap and composite anti-perforation mid-sole.

• Weight 2.5 kgs
• Excellent resistance to heat contact, heat flow, fire
• Excellent resistance to chemicals : fuels, oils, greases, solvents, weak and diluted acids.
• Excellent resistance to abrasion and cuts

The Flameguard Mk 2 suit is a two-piece garment constructed in aluminised fire resistant cotton to EN532. The jacket has a stand-up collar, elasticated cuffs, and is closed by 50 mm wide touch and close fastening to the front and collar.
The trousers have 25 mm webbing braces with plastic adjusters to fit a wide range of wearers. The lower leg is elasticated. They come in one size only.
The gloves are made from aluminised fire resistant cotton backs and FR cotton palms and are worn over non-conducting gloves.
The helmet assembly comprises a safety helmet to EN397 fitted with a fabric neck-curtain and a replaceable 2 mm heat and impact resistant polycarbonate visor. The visor can be flipped up. A chinstrap is fitted to secure the helmet.
Wellington boots sizes 10(UK) with protective toecap to EN20345 are provided.

The Fireguard suit is a two-piece garmentwith a two-layer construction of fireresistant natural fibre to EN532. It hasbeen treated with Proban and a waterrepellent finish, which can withstand 50washes without degradation. The jackethas a stand-up collar, elasticated cuffs, andis closed by a zip covered by a flap withtouch and close fastening to front andcollar. The trousers have an elastic halterand plastic adjuster allowing a wide rangeof wearers. The lower leg is tightened withtouch and close straps. They come in onesize only.
The outer gloves are made from the samefabric as the suit and are worn over nonconducting gloves.
The helmet assembly comprises a safetyhelmet to EN397 fitted with a fabric neckcurtainand a replaceable 2 mm heat andimpact resistant polycarbonate visor. Thevisor can be flipped up. A chinstrap is fittedto secure the helmet.
Wellington boots sizes 10(UK) with protective toecap to EN20345 are provided.

• Inherent buoyancy in excess of 100N (when worn with1MQ4)
• Provides a degree of thermal protection against cold water shock and delays hypothermia upon immersion
• Fully waterproof
• SOLAS/IMO approved reflective tape on hood, upper arms and wrists
• High-visibility yellow adjustable insulated peaked hood, with built-in chin and face protection stored into collar
• Hip pockets with fleece hand warmer
• Pocket on left arm with water-repellent flap
• Marine grade whistle
• New ID pocket and possibility to add a SOLAS light
• Inner adjustable neoprene wrist seals
• Extra strong reinforcement panels to seat (600 Denier)
• Crutch strap
• New style badging including norms displayed on left arm strap

• Inherent buoyancy in excess of 80N (foam lined all the way down to the ankle)
• Provides a degree of thermal protection against cold water shock and hypothermia
• Fully waterproof / SOLAS/IMO approved reflective tape on hood, upper arms, wrists and ankles
• High-visibility yellow adjustable insulated peaked hood, with built-in chin and face protection stored into collar
• Hip pockets with fleece hand warmer
• Pocket on left arm with waterrepellent flap /marine grade whistle / new ID pocket and possibility to add a SOLAS light
• Extra pocket on the right arm for strobe light
• Inner adjustable neoprene wrist seals
• Extra strong reinforcement panels added to knees and seat area (600 Denier)
• New style badging / Anti-flushing reflective straps to arms & legs including new easy grip pull tabs.

The OSS Immersion Suit is fast and simple to don and is MED Ship’s Wheel Approved. Designed with close fitting high stretch neoprene to dramatically reduce air entrapment and ensure a high level of water performance when used in conjunction with an approved lifejacket.

Features

• High manoeuvrability in water
• Thermal insulation
• Dual gloves for manual dexterity
• Inner glove : Latex 5 fingered
• Outer glove : Neoprene 2 fingered
• RIRI zipper technology – low maintenance
• Full face seal to allow good peripheral vision
• Clear donning instructions on bag
• Retro reflective tape
• Heavy duty ribbed soles for maximum protection
• Weight approximately 3kg
• Bag dimensions: 52cm x 29cm

Easy to use, low cost and lightweight, this emergency abandonment suit is designed to accommodate all sizes.

Features

• Full five fingered gloves
• Full face seal
• Large offset zip for quick donning
• Complete with a zipper pouch
• Allows donning when wearing boots

Unique aluminised polythene suit designed with heat sealed seams for maximum protection.

• MED Ship’s Wheel approved
• One size fits all
• Protection to -30 degrees C